[gpfsug-discuss] CES doesn't assign addresses to nodes
Olaf Weiser
olaf.weiser at de.ibm.com
Tue Jan 31 17:45:17 GMT 2017
I ll open a pmr here for my env ... the issue may hurt you in a ces env. only... but needs to be fixed in core gpfs.base i thi k
Gesendet von IBM Verse
Jonathon A Anderson --- Re: [gpfsug-discuss] CES doesn't assign addresses to nodes ---
Von:"Jonathon A Anderson" <jonathon.anderson at colorado.edu>An:"gpfsug main discussion list" <gpfsug-discuss at spectrumscale.org>Datum:Di. 31.01.2017 17:32Betreff:Re: [gpfsug-discuss] CES doesn't assign addresses to nodes
No, I’m having trouble getting this through DDN support because, while we have a GPFS server license and GRIDScaler support, apparently we don’t have “protocol node” support, so they’ve pushed back on supporting this as an overall CES-rooted effort.
I do have a DDN case open, though: 78804. If you are (as I suspect) a GPFS developer, do you mind if I cite your info from here in my DDN case to get them to open a PMR?
Thanks.
~jonathon
From: <gpfsug-discuss-bounces at spectrumscale.org> on behalf of Olaf Weiser <olaf.weiser at de.ibm.com> Reply-To: gpfsug main discussion list <gpfsug-discuss at spectrumscale.org> Date: Tuesday, January 31, 2017 at 8:42 AM To: gpfsug main discussion list <gpfsug-discuss at spectrumscale.org> Subject: Re: [gpfsug-discuss] CES doesn't assign addresses to nodes
ok.. so obviously ... it seems , that we have several issues.. the 3983 characters is obviously a defect have you already raised a PMR , if so , can you send me the number ? From: Jonathon A Anderson <jonathon.anderson at colorado.edu> To: gpfsug main discussion list <gpfsug-discuss at spectrumscale.org> Date: 01/31/2017 04:14 PM Subject: Re: [gpfsug-discuss] CES doesn't assign addresses to nodes Sent by: gpfsug-discuss-bounces at spectrumscale.org
The tail isn’t the issue; that’ my addition, so that I didn’t have to paste the hundred or so line nodelist into the thread. The actual command is tsctl shownodes up | $tr ',' '\n' | $sort -o $upnodefile But you can see in my tailed output that the last hostname listed is cut-off halfway through the hostname. Less obvious in the example, but true, is the fact that it’s only showing the first 120 hosts, when we have 403 nodes in our gpfs cluster. [root at sgate2 ~]# tsctl shownodes up | tr ',' '\n' | wc -l 120 [root at sgate2 ~]# mmlscluster | grep '\-opa' | wc -l 403 Perhaps more explicitly, it looks like `tsctl shownodes up` can only transmit 3983 characters. [root at sgate2 ~]# tsctl shownodes up | wc -c 3983 Again, I’m convinced this is a bug not only because the command doesn’t actually produce a list of all of the up nodes in our cluster; but because the last name listed is incomplete. [root at sgate2 ~]# tsctl shownodes up | tr ',' '\n' | tail -n 1 shas0260-opa.rc.int.col[root at sgate2 ~]# I’d continue my investigation within tsctl itself but, alas, it’s a binary with no source code available to me. :) I’m trying to get this opened as a bug / PMR; but I’m still working through the DDN support infrastructure. Thanks for reporting it, though. For the record: [root at sgate2 ~]# rpm -qa | grep -i gpfs gpfs.base-4.2.1-2.x86_64 gpfs.msg.en_US-4.2.1-2.noarch gpfs.gplbin-3.10.0-327.el7.x86_64-4.2.1-0.x86_64 gpfs.gskit-8.0.50-57.x86_64 gpfs.gpl-4.2.1-2.noarch nfs-ganesha-gpfs-2.3.2-0.ibm24.el7.x86_64 gpfs.ext-4.2.1-2.x86_64 gpfs.gplbin-3.10.0-327.36.3.el7.x86_64-4.2.1-2.x86_64 gpfs.docs-4.2.1-2.noarch ~jonathon From: <gpfsug-discuss-bounces at spectrumscale.org> on behalf of Olaf Weiser <olaf.weiser at de.ibm.com> Reply-To: gpfsug main discussion list <gpfsug-discuss at spectrumscale.org> Date: Tuesday, January 31, 2017 at 1:30 AM To: gpfsug main discussion list <gpfsug-discuss at spectrumscale.org> Subject: Re: [gpfsug-discuss] CES doesn't assign addresses to nodes Hi ...same thing here.. everything after 10 nodes will be truncated.. though I don't have an issue with it ... I 'll open a PMR .. and I recommend you to do the same thing.. ;-) the reason seems simple.. it is the "| tail" .at the end of the command.. .. which truncates the output to the last 10 items... should be easy to fix.. cheers olaf From: Jonathon A Anderson <jonathon.anderson at colorado.edu> To: "gpfsug-discuss at spectrumscale.org" <gpfsug-discuss at spectrumscale.org> Date: 01/30/2017 11:11 PM Subject: Re: [gpfsug-discuss] CES doesn't assign addresses to nodes Sent by: gpfsug-discuss-bounces at spectrumscale.org
In trying to figure this out on my own, I’m relatively certain I’ve found a bug in GPFS related to the truncation of output from `tsctl shownodes up`. Any chance someone in development can confirm? Here are the details of my investigation: ## GPFS is up on sgate2 [root at sgate2 ~]# mmgetstate Node number Node name GPFS state ------------------------------------------ 414 sgate2-opa active ## but if I tell ces to explicitly put one of our ces addresses on that node, it says that GPFS is down [root at sgate2 ~]# mmces address move --ces-ip 10.225.71.102 --ces-node sgate2-opa mmces address move: GPFS is down on this node. mmces address move: Command failed. Examine previous error messages to determine cause. ## the “GPFS is down on this node” message is defined as code 109 in mmglobfuncs [root at sgate2 ~]# grep --before-context=1 "GPFS is down on this node." /usr/lpp/mmfs/bin/mmglobfuncs 109 ) msgTxt=\ "%s: GPFS is down on this node." ## and is generated by printErrorMsg in mmcesnetmvaddress when it detects that the current node is identified as “down” by getDownCesNodeList [root at sgate2 ~]# grep --before-context=5 'printErrorMsg 109' /usr/lpp/mmfs/bin/mmcesnetmvaddress downNodeList=$(getDownCesNodeList) for downNode in $downNodeList do if [[ $toNodeName == $downNode ]] then printErrorMsg 109 "$mmcmd" ## getDownCesNodeList is the intersection of all ces nodes with GPFS cluster nodes listed in `tsctl shownodes up` [root at sgate2 ~]# grep --after-context=16 '^function getDownCesNodeList' /usr/lpp/mmfs/bin/mmcesfuncs function getDownCesNodeList { typeset sourceFile="mmcesfuncs.sh" [[ -n $DEBUG || -n $DEBUGgetDownCesNodeList ]] && set -x $mmTRACE_ENTER "$*" typeset upnodefile=${cmdTmpDir}upnodefile typeset downNodeList # get all CES nodes $sort -o $nodefile $mmfsCesNodes.dae $tsctl shownodes up | $tr ',' '\n' | $sort -o $upnodefile downNodeList=$($comm -23 $nodefile $upnodefile) print -- $downNodeList } #----- end of function getDownCesNodeList -------------------- ## but not only are the sgate nodes not listed by `tsctl shownodes up`; its output is obviously and erroneously truncated [root at sgate2 ~]# tsctl shownodes up | tr ',' '\n' | tail shas0251-opa.rc.int.colorado.edu shas0252-opa.rc.int.colorado.edu shas0253-opa.rc.int.colorado.edu shas0254-opa.rc.int.colorado.edu shas0255-opa.rc.int.colorado.edu shas0256-opa.rc.int.colorado.edu shas0257-opa.rc.int.colorado.edu shas0258-opa.rc.int.colorado.edu shas0259-opa.rc.int.colorado.edu shas0260-opa.rc.int.col[root at sgate2 ~]# ## I expect that this is a bug in GPFS, likely related to a maximum output buffer for `tsctl shownodes up`. On 1/24/17, 12:48 PM, "Jonathon A Anderson" <jonathon.anderson at colorado.edu> wrote: I think I'm having the same issue described here: http://www.spectrumscale.org/pipermail/gpfsug-discuss/2016-October/002288.html Any advice or further troubleshooting steps would be much appreciated. Full disclosure: I also have a DDN case open. (78804) We've got a four-node (snsd{1..4}) DDN gridscaler system. I'm trying to add two CES protocol nodes (sgate{1,2}) to serve NFS. Here's the steps I took: --- mmcrnodeclass protocol -N sgate1-opa,sgate2-opa mmcrnodeclass nfs -N sgate1-opa,sgate2-opa mmchconfig cesSharedRoot=/gpfs/summit/ces mmchcluster --ccr-enable mmchnode --ces-enable -N protocol mmces service enable NFS mmces service start NFS -N nfs mmces address add --ces-ip 10.225.71.104,10.225.71.105 mmces address policy even-coverage mmces address move --rebalance --- This worked the very first time I ran it, but the CES addresses weren't re-distributed after restarting GPFS or a node reboot. Things I've tried: * disabling ces on the sgate nodes and re-running the above procedure * moving the cluster and filesystem managers to different snsd nodes * deleting and re-creating the cesSharedRoot directory Meanwhile, the following log entry appears in mmfs.log.latest every ~30s: --- Mon Jan 23 20:31:20 MST 2017: mmcesnetworkmonitor: Found unassigned address 10.225.71.104 Mon Jan 23 20:31:20 MST 2017: mmcesnetworkmonitor: Found unassigned address 10.225.71.105 Mon Jan 23 20:31:20 MST 2017: mmcesnetworkmonitor: handleNetworkProblem with lock held: assignIP 10.225.71.104_0-_+,10.225.71.105_0-_+ 1 Mon Jan 23 20:31:20 MST 2017: mmcesnetworkmonitor: Assigning addresses: 10.225.71.104_0-_+,10.225.71.105_0-_+ Mon Jan 23 20:31:20 MST 2017: mmcesnetworkmonitor: moveCesIPs: 10.225.71.104_0-_+,10.225.71.105_0-_+ --- Also notable, whenever I add or remove addresses now, I see this in mmsysmonitor.log (among a lot of other entries): --- 2017-01-23T20:40:56.363 sgate1 D ET_cesnetwork Entity state without requireUnique: ces_network_ips_down WARNING No CES relevant NICs detected - Service.calculateAndUpdateState:275 2017-01-23T20:40:11.364 sgate1 D ET_cesnetwork Update multiple entities at once {'p2p2': 1, 'bond0': 1, 'p2p1': 1} - Service.setLocalState:333 --- For the record, here's the interface I expect to get the address on sgate1: --- 11: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 9000 qdisc noqueue state UP link/ether 3c:fd:fe:08:a7:c0 brd ff:ff:ff:ff:ff:ff inet 10.225.71.107/20 brd 10.225.79.255 scope global bond0 valid_lft forever preferred_lft forever inet6 fe80::3efd:feff:fe08:a7c0/64 scope link valid_lft forever preferred_lft forever --- which is a bond of p2p1 and p2p2. --- 6: p2p1: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 9000 qdisc mq master bond0 state UP qlen 1000 link/ether 3c:fd:fe:08:a7:c0 brd ff:ff:ff:ff:ff:ff 7: p2p2: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 9000 qdisc mq master bond0 state UP qlen 1000 link/ether 3c:fd:fe:08:a7:c0 brd ff:ff:ff:ff:ff:ff --- A similar bond0 exists on sgate2. I crawled around in /usr/lpp/mmfs/lib/mmsysmon/CESNetworkService.py for a while trying to figure it out, but have been unsuccessful so far. _______________________________________________ gpfsug-discuss mailing list gpfsug-discuss at spectrumscale.org http://gpfsug.org/mailman/listinfo/gpfsug-discuss _______________________________________________ gpfsug-discuss mailing list gpfsug-discuss at spectrumscale.org http://gpfsug.org/mailman/listinfo/gpfsug-discuss
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://gpfsug.org/pipermail/gpfsug-discuss_gpfsug.org/attachments/20170131/5a8ac922/attachment-0002.htm>
More information about the gpfsug-discuss
mailing list