[gpfsug-discuss] IO sizes
Uwe Falke
uwe.falke at kit.edu
Thu Feb 24 01:03:32 GMT 2022
Hi,
the test bench is gpfsperf running on up to 12 clients with 1...64
threads doing sequential reads and writes , file size per gpfsperf
process is 12TB (with 6TB I saw caching effects in particular for large
thread numbers ...)
As I wrote initially: GPFS is issuing nothing but 8MiB IOs to the data
disks, as expected in that case.
Interesting thing though:
I have rebooted the suspicious node. Now, it does not issue smaller IOs
than the others, but -- unbelievable -- larger ones (up to about
4.7MiB). This is still harmful as also that size is incompatible with
full stripe writes on the storage ( 8+2 disk groups, i.e. logically RAID6)
Currently, I draw this information from the storage boxes; I have not
yet checked iostat data for that benchmark test after the reboot
(before, when IO sizes were smaller, we saw that both in iostat and in
the perf data retrieved from the storage controllers).
And: we have a separate data pool , hence dataOnly NSDs, I am just
talking about these ...
As for "Are you sure that Linux OS is configured the same on all 4 NSD
servers?." - of course there are not two boxes identical in the world. I
have actually not installed those machines, and, yes, i also considered
reinstalling them (or at least the disturbing one).
However, I do not have reason to assume or expect a difference, the
supplier has just implemented these systems recently from scratch.
In the current situation (i.e. with IOs bit larger than 4MiB) setting
max_sectors_kB to 4096 might do the trick, but as I do not know the
cause for that behaviour it might well start to issue IOs smaller than
4MiB again at some point, so that is not a nice solution.
Thanks
Uwe
On 23.02.22 22:20, Andrew Beattie wrote:
> Alex,
>
> Metadata will be 4Kib
>
> Depending on the filesystem version you will also have subblocks to
> consider V4 filesystems have 1/32 subblocks, V5 filesystems have
> 1/1024 subblocks (assuming metadata and data block size is the same)
>
> My first question would be is “ Are you sure that Linux OS is
> configured the same on all 4 NSD servers?.
>
> My second question would be do you know what your average file size is
> if most of your files are smaller than your filesystem block size,
> then you are always going to be performing writes using groups of
> subblocks rather than a full block writes.
>
> Regards,
>
> Andrew
>
>
>> On 24 Feb 2022, at 04:39, Alex Chekholko <alex at calicolabs.com> wrote:
>>
>> Hi, Metadata I/Os will always be smaller than the usual data block
>> size, right? Which version of GPFS? Regards, Alex On Wed, Feb 23,
>> 2022 at 10:26 AM Uwe Falke <uwe.falke at kit.edu> wrote: Dear all, sorry
>> for asking a question which seems ZjQcmQRYFpfptBannerStart
>> This Message Is From an External Sender
>> This message came from outside your organization.
>> ZjQcmQRYFpfptBannerEnd
>> Hi,
>>
>> Metadata I/Os will always be smaller than the usual data block size,
>> right?
>> Which version of GPFS?
>>
>> Regards,
>> Alex
>>
>> On Wed, Feb 23, 2022 at 10:26 AM Uwe Falke <uwe.falke at kit.edu> wrote:
>>
>> Dear all,
>>
>> sorry for asking a question which seems not directly GPFS related:
>>
>> In a setup with 4 NSD servers (old-style, with storage
>> controllers in
>> the back end), 12 clients and 10 Seagate storage systems, I do
>> see in
>> benchmark tests that just one of the NSD servers does send
>> smaller IO
>> requests to the storage than the other 3 (that is, both reads and
>> writes are smaller).
>>
>> The NSD servers form 2 pairs, each pair is connected to 5 seagate
>> boxes
>> ( one server to the controllers A, the other one to controllers B
>> of the
>> Seagates, resp.).
>>
>> All 4 NSD servers are set up similarly:
>>
>> kernel: 3.10.0-1160.el7.x86_64 #1 SMP
>>
>> HBA: Broadcom / LSI Fusion-MPT 12GSAS/PCIe Secure SAS38xx
>>
>> driver : mpt3sas 31.100.01.00
>>
>> max_sectors_kb=8192 (max_hw_sectors_kb=16383 , not 16384, as
>> limited by
>> mpt3sas) for all sd devices and all multipath (dm) devices built
>> on top.
>>
>> scheduler: deadline
>>
>> multipath (actually we do have 3 paths to each volume, so there
>> is some
>> asymmetry, but that should not affect the IOs, shouldn't it?, and
>> if it
>> did we would see the same effect in both pairs of NSD servers,
>> but we do
>> not).
>>
>> All 4 storage systems are also configured the same way (2 disk
>> groups /
>> pools / declustered arrays, one managed by ctrl A, one by ctrl
>> B, and
>> 8 volumes out of each; makes altogether 2 x 8 x 10 = 160 NSDs).
>>
>>
>> GPFS BS is 8MiB , according to iohistory (mmdiag) we do see clean IO
>> requests of 16384 disk blocks (i.e. 8192kiB) from GPFS.
>>
>> The first question I have - but that is not my main one: I do
>> see, both
>> in iostat and on the storage systems, that the default IO
>> requests are
>> about 4MiB, not 8MiB as I'd expect from above settings
>> (max_sectors_kb
>> is really in terms of kiB, not sectors, cf.
>> https://www.kernel.org/doc/Documentation/block/queue-sysfs.txt).
>>
>> But what puzzles me even more: one of the server compiles IOs even
>> smaller, varying between 3.2MiB and 3.6MiB mostly - both for
>> reads and
>> writes ... I just cannot see why.
>>
>> I have to suspect that this will (in writing to the storage) cause
>> incomplete stripe writes on our erasure-coded volumes (8+2p)(as
>> long as
>> the controller is not able to re-coalesce the data properly; and it
>> seems it cannot do it completely at least)
>>
>>
>> If someone of you has seen that already and/or knows a potential
>> explanation I'd be glad to learn about.
>>
>>
>> And if some of you wonder: yes, I (was) moved away from IBM and
>> am now
>> at KIT.
>>
>> Many thanks in advance
>>
>> Uwe
>>
>>
>> --
>> Karlsruhe Institute of Technology (KIT)
>> Steinbuch Centre for Computing (SCC)
>> Scientific Data Management (SDM)
>>
>> Uwe Falke
>>
>> Hermann-von-Helmholtz-Platz 1, Building 442, Room 187
>> D-76344 Eggenstein-Leopoldshafen
>>
>> Tel: +49 721 608 28024
>> Email: uwe.falke at kit.edu
>> www.scc.kit.edu <http://www.scc.kit.edu>
>>
>> Registered office:
>> Kaiserstraße 12, 76131 Karlsruhe, Germany
>>
>> KIT – The Research University in the Helmholtz Association
>>
>> _______________________________________________
>> gpfsug-discuss mailing list
>> gpfsug-discuss at spectrumscale.org <http://spectrumscale.org>
>> http://gpfsug.org/mailman/listinfo/gpfsug-discuss
>>
>
>
>
> _______________________________________________
> gpfsug-discuss mailing list
> gpfsug-discuss at spectrumscale.org
> http://gpfsug.org/mailman/listinfo/gpfsug-discuss
--
Karlsruhe Institute of Technology (KIT)
Steinbuch Centre for Computing (SCC)
Scientific Data Management (SDM)
Uwe Falke
Hermann-von-Helmholtz-Platz 1, Building 442, Room 187
D-76344 Eggenstein-Leopoldshafen
Tel: +49 721 608 28024
Email:uwe.falke at kit.edu
www.scc.kit.edu
Registered office:
Kaiserstraße 12, 76131 Karlsruhe, Germany
KIT – The Research University in the Helmholtz Association
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://gpfsug.org/pipermail/gpfsug-discuss_gpfsug.org/attachments/20220224/57fff318/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 5814 bytes
Desc: S/MIME Cryptographic Signature
URL: <http://gpfsug.org/pipermail/gpfsug-discuss_gpfsug.org/attachments/20220224/57fff318/attachment.bin>
More information about the gpfsug-discuss
mailing list